ISP1507

This miniature BLE module by InsightSIP, based on the latest nRF52 chip from Nordic Semiconductor represents the state of the art in Bluetooth Module Technology.
At 8x8x1 mm, we believe this is the smallest Bluetooth Low Energy module on the market.
It offers a full Bluetooth 5 Ready stack and IPv6 connectivity, and thus can form the hub of IOT (Internet of Things) solutions.
With an M4 floating point processor, the ISP1507 Bluetooth Smart Module is able to do fast calculations, and run advanced security and cryptography calculations, and with a large memory capacity, is able to support sophisticated applications.
In many cases, this module can eliminate the need for an additional microprocessor and/or additional memory that might have been necessary for previous generation products, saving cost of the total solution.
This increased computing capability comes coupled with best-in-class battery life, with power consumption around 20-50% lower than previous generations of technology, (depending on the exact use-case), making this Bluetooth Low Energy / BLE module without compromise.
The addition of integrated NFC touch-to-pair capability adds a further feature that would have previously required additional components.
With its tiny size, high performance and wide feature set, the ISP1507 BLE Module truly represents a case where “less is more”. It is the ideal choice where solutions require complex applications, fast processing and/or best in class power consumption.

Applications:
Connected sensors for medical devices, healthcare, sport, fitness, industrial
IoT applications, connected objects
Wearable technology
Home automation
Beacons

This module is based on nRF52 Nordic Semiconductor System on Chip (SoC).
It can support BLE, ANT/ANT+ and a range of proprietary 2.4 GHz protocols.
An NFC Tag is available for OOB pairing.
Free qualified BLE stacks for nRF52832 are implemented in the S132 SoftDevices and enable ISP1507 to be used in Central, Peripheral or both roles.
nRF52832 platform also provides extensive software support for ANT applications with S212 SoftDevices and dual ANT/BLE S332 stack.

Main Specifications:
Single Mode BLE 5 Ready
ANT/ANT+ stack available
NFC-A Tag for OOB pairing
Based on Nordic Semiconductor nRF52
2.4GHz low energy RF Transceiver
32-bit ARM Cortex M4 CPU
512 kB Flash & 64 kB SRAM
30 GPIOs including ADC, SPI, UART, PDM, I2C
Ultra small size 8.0 x 8.0 x 1.0 mm
Fully integrated RF matching and Antenna
Integrated 32 MHz & 32kHZ Clock
DC/DC converter with loading circuit

Operating Conditions:
Supply voltage 1.7 to 3.6 V
Temperature range -40 to +85°C

Power Consumption:
Peak current, Rx active 6.1 mA
Peak current, Tx active 5.4 mA
Deep sleep current 0.4 µA

Clock Sources:
Internal HF clock, 32 MHz crystal
Internal LF clock, 32.768 kHz crystal
Frequency tolerance +/- 40 ppm

Radio Specification:
Frequency range 2402-2480 MHz
Rx sensitivity -96 dBm
Antenna gain 0.6 dBi
Range open field 100 m typ
Data rate up to 2 Mbps

Product User Guide:
Ordering Information
ISP1507-AX-ZZ
BLE & ANT protocol, 512 kB flash, 64 kB RAM

Prototype Packaging (ZZ = ST):
Delivered in unsealed standard trays or cut tapes
Please bake the module before assembly

Jedec Trays (ZZ = JT):
Delivered in sealed packaging

Tape & Reels:
Delivered in sealed packaging
Multiple of 500 units (ZZ = RS)
Multiple of 2000 units (ZZ = R2)

Storage:
Electronic sensitive devices

Moisture Sensitivity:
Level MSL-5
Bake 24 hours at 125°C if module stored at ambient room

Soldering Information:
According to Jedec J-STD-020
Maximum peak temperature
260°C / 30 sec